V-Top Surgery Table Large 19"wide x 58"long table top,
features two V-top panels which adjust independently. 360° revolving capability & horizontal to near vertical positioning allows you to hold your patient in the right operating position without a thoracic positioner. Two sliding, quick-release, tie-down attachments are provided on each side for patient restraint. A 3" stainless steel trough, centered under the top panels, collects fluids into a collecting pail (not included). A foot-operated lift mechanism in the hydraulic base provides up and down capability, adjusting table height from 30 1/2" to 41".
Model 903.4100.00 Hydraulic Base - Call for Price
Flat Top Surgery Table
Large 22" wide x 60: long top is die formed with rounded corners, to eliminate seams and sharp edges and ensure a bacteria-free environment. The table features slight center elevation with a shallow through around the table edges for fluid drainage. A drain outlet on the end has a hook for optional collecting pail. One directional tilt locks in any angle from horizontal to near vertical and the Hydraulic base offers height adjustment from 28 3/4" to 39 1/4". Rail system runs continually along the sides and ends of the table, and features four sliding, quick-release tie downs.
Model 903.4000.00 Hydraulic Base - Call for Price Model 903.4010.00 Pedestal Base / Stationary Height - Call for Price
VETLIFT
SURGERY TABLE This high
tech design provides added support and stability.
The 18 gauge stainless steel top measures a large
22" wide x 60" long with an anti-drip
edge and a drain hole with hook for optional
collecting pail. Tie downs on each side of table
provide for easy positioning of patient. The
table has been specifically designed for
operating ease and suited with a tilt top
mechanism. Available in electric or hydraulic
foot pump models. Model VL 9020HL Hydraulic Foot Pump
$1297.00 Model VL 900EL Standard Electric Lift
$1559.00
Flat Top Surgery Table with Electric Height Adjustment
50"L x 22" top tilts 0 to 30 degrees with finger tip control lever
Especially designed to be convenient for sit-down surgery as well as stand-up
4 quick release restraints are attached to underside of table and can be easily positioned and locked
Foot pedal provides 22"- 40" height
Drain Hole and bucket available
3 Year warranty
Model T-1000 $1659.00
V -Top Surgery Table /Electric Height
50" x 20" top tilts 0- 30 deg end to end and 0 - 90 deg "V" - with fingertip control
Uses battery (rechargeable) to eliminate cords on floor
Especially designed to be convenient for sit-down surgery as well as
stand-up
4 quick release restraints are attached to underside of table and can be
easily positioned and locked
Foot pedal for up-down control
Removable stainless top leaves for easy cleaning
3 Year Warranty
Model T5000 $1899.00
To Order Call Toll Free 800-780-5266 - 9:30AM to 5:00PM EST or Fax Your Order To 954-340-2457 - 24 Hours A Day (Local And Export Call 954-345-3990)
Paragon Medical P.O. Box 770187 Coral Springs, Florida 33077
All contents Copyright 2005 by
Paragon Medical Supply, Inc. Any information on
this website may not be copied, reproduced or
distributed without prior written permission.
Large 19"wide x 58"long table top,
features two V-top panels which adjust independently. 360° revolving capability & horizontal to near vertical positioning allows you to hold your patient in the right operating position without a thoracic positioner. Two sliding, quick-release, tie-down attachments are provided on each side for patient restraint. A 3" stainless steel trough, centered under the top panels, collects fluids into a collecting pail (not included). A foot-operated lift mechanism in the hydraulic base provides up and down capability, adjusting table height from 30 1/2" to 41".
Large 22" wide x 60: long top is die formed with rounded corners, to eliminate seams and sharp edges and ensure a bacteria-free environment. The table features slight center elevation with a shallow through around the table edges for fluid drainage. A drain outlet on the end has a hook for optional collecting pail. One directional tilt locks in any angle from horizontal to near vertical and the Hydraulic base offers height adjustment from 28 3/4" to 39 1/4". Rail system runs continually along the sides and ends of the table, and features four sliding, quick-release tie downs.
This high
tech design provides added support and stability.
The 18 gauge stainless steel top measures a large
22" wide x 60" long with an anti-drip
edge and a drain hole with hook for optional
collecting pail. Tie downs on each side of table
provide for easy positioning of patient. The
table has been specifically designed for
operating ease and suited with a tilt top
mechanism. Available in electric or hydraulic
foot pump models.
